How To Install An SSD – Guide

For decades, data was mostly stored on mechanical hard drives. These traditional hard disk drives (HDDs) rely primarily on moving parts, such as a read/write head, that move back and forth to collect data. This makes HDDs the most likely components of computer hardware to fail. The new solid state drives work completely differently. They use a simple memory chip called NAND flash memory, which has no moving parts and provides near-instant access times. The first experiments with SSD-like technology began in the 1950s and were used in high-end supercomputers in the 1970s and 1980s. However, the technology was extremely expensive and the storage capacity was small (2MB to 20MB) compared to the ridiculous five-figure prices. SSD technology was occasionally used in military and aerospace applications, but it wasn’t until the 1990s that it began to be used in consumer devices. In the early 1990s, hardware innovations caused the prices of SSDs to drop. However, lifespan and size were still an issue: an SSD had a lifespan of around 10 years. It didn’t go to the final 2000s that SSDs became more reliable and allowed decades of continuous operation at acceptable access speeds.

How to install an SSD

How to install a solid state drive to a desktop PC

How to install a solid state drive in a laptop

Final note

I hope you like the guide How To Install An SSD. In case if you have any query regards this article you may ask us. Also, please share your love by sharing this article with your friends.